Installing a Red Vinyl Wraps is not as simple as it seems. There are many factors to consider before installing a vinyl wrapping to achieve quality results. Wrap Guys, a leading supplier of high-quality vehicle wraps, understands the importance of proper installation for each wrap project. We have put together some information on how to install a Red Vinyl Wraps for a car to show why it is best to leave this to professionals.
Find out 3 reasons why you should hire a professional to install your Red Vinyl Wraps.
How to Wrap a Car Properly
To ensure long-lasting and high-quality results, you must follow the steps below:
1. Plan the vehicle's surface
A wrap installer must inspect and measure a vehicle's surface before wrapping it. A map of the vehicle's surface is necessary because each vehicle has its own unique dimensions. This allows technicians to be prepared for any challenges or curves that may arise.
2. Surface Cleaning and Preparation of Vehicles
It is important to thoroughly clean the vehicle's exterior to remove all dirt and grime, which could interfere with the vinyl wrapping. It may be worthwhile to repair any surface imperfections such as deep scratches, large paint chips or rust before applying vinyl. Certain types of damage can show through the vinyl, or damage the wrap in future. This will reduce its durability and useful life.(Black Vinyl Wrap)
3. Measure the vinyl and cut it
The vinyl wrapping installation process begins with measuring the vehicle and cutting the vinyl according to its contours. The best vehicle wrap providers will always add an extra few inches to the measurements, and then trim the excess material once the wrap is installed. This reduces the chances of any imperfections.
4. Install the vinyl on the vehicle
Installers will begin by carefully peeling off the backing vinyl and then start to lay the wrap onto the vehicle. To avoid air bubbles, the installer will start in the center and work outwards to the edges. The technician will then use a squeegee to remove air trapped beneath the surface of the wrap. This will ensure a smooth finish.
